 The following instructions are for pencil listello, 50mm Listello and 110mm listello.
1. Once you have decided where to place your listellos complete tiling below. |
|
|
|
|
|
|
|
| 9. Once room is complete, your listellos, with gentle care will last a lifetime. Clean with a soft cloth using mild soapy water. Do not apply bleach type cleaners, limescale removers or any abrasive products. |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
|
||||||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|||||
 |
|
|||||||||||||
 |
 |
|
||||||||||||
 |
 |
|
||||||||||||
 |
|
|||||||||||||
 |
|
|||||||||||||
 |
|
|||||||||||||
 |
|
|||||||||||||
 |
|
|||||||||||||
 |
|
|||||||||||||
 |
|
|||||||||||||
 |
|
|||||||||||||
 |
|
|||||||||||||
 |
|
|||||||||||||
 |
|
|||||||||||||
|
|
||||||||||||||
2. Allowing for mitres in the corners, measure and cut listello to length.
3. When joining straight pieces over-lap two listellos lining up pattern, mark and cut both. When placed along side each other the pattern will now line up.
4. Apply adhesive to back of listello.
5. Position listello onto wall, ensure grout joint between tiles and listello. Remove with damp sponge excess adhesive (dry adhesive is much more difficult to remove.)
6. Continue tiling above listello, again ensuring grout joint below listellos and tiles.
7. When using more than one listello border, repeat process at the next chosen height.
8. Grout tiles in the normal way, take care to remove all excess grout from listello surface.