| under tile seal Fixing Instructions |
 |
|||||||||
|
||||||||||
 |
 |
 |
||||||||
| 1. Seal your bath first with a suitable silicone sealant. Ensure sealant fills all gaps creating a watertight seal. There is no need to let the sealant dry before installing your bath seal. | 2. Allowing for mitres where necessary cut bath seal to length. | 3. Apply adhesive to wall. Push bath seal into adhesive so that adhesive penetrates bath seal holes. | ||||||||
 |
 |
 |
||||||||
| 4. Fix tiles in the normal way ensuring tiles are bedded securely against bath seal. | 5. Sponge off any excess tile adhesive do not allow adhesive to dry on bath seal as this will be difficult to remove later and may damage the seal. | 6. Grout tiles in the normal way, again ensuring excess grout is not allowed to dry on bath seal. Allow adhesive, grout and sealant to fully cure before normal use. | ||||||||
|
Please note. The above information is offered
as a guide only, please consult your tile supplier for full fixing
and grouting instructions for the tile you have chosen.
|
||||||||||
