1. Ensure walls are flat and free from dust & dirt etc. Measure 102cm from floor, (2cm extra allows for uneven floors). Draw a level horizontal line around room.

2. Apply adhesive to the back of one panel. (use no nails type product or water resistant grade tile adhesive).

3. Staring from a corner, place panel on wall. The panel should be vertical and touching your level line.

4. Continue process around room, cutting panels to fit in corners with a jigsaw as required, (use fine blade). Remove excess adhesive between panels immediately with a damp cloth. Do not allow adhesive to dry on face of panel.

5. Once panelling is complete, allowing for miters, cut dado to length and fix using adhesive.

6. Repeat process with skirting. Once finished allow adhesive to cure before normal use.