bath & worktop seals
Under Tile Seal | Over Tile Seal | Self Adhesive Bath Seal | Ceramic Look Bath Seal

1. Seal your bath first with a suitable silicone sealant. Ensure sealant fills all gaps creating a watertight seal. There is no need to let the sealant dry before installing your bath seal.

2. Allowing for mitres where necessary cut bath seal to length.

3. Apply adhesive to wall. Push bath seal into adhesive so that adhesive penetrates bath seal holes.

4. Fix tiles in the normal way ensuring tiles are bedded securely against bath seal.

5. Sponge off any excess tile adhesive do not allow adhesive to dry on bath seal as this will be difficult to remove later and may damage the seal.

6. Grout tiles in the normal way, again ensuring excess grout is not allowed to dry on bath seal. Allow adhesive, grout and sealant to fully cure before normal use.

Please note. The above information is offered as a guide only, please consult your tile supplier for full fixing and grouting instructions for the tile you have chosen.

 
Click here for the Homebase Website.